{"title":"Development Boards","description":"\u003cp\u003eBrowse our Development Boards collection. Free Shipping.\u003c\/p\u003e","products":[{"product_id":"barebones-avr-dev-board-discontinued","title":"Barebones AVR dev. board [Discontinued]","description":"\u003cp\u003eWe took the business-card-sized AVR target board from Evil Mad Scientist Laboratories and added a few components to make an AVR dev board that has only the bare minimums!\u003c\/p\u003e\u003cp\u003eComes unassembled with:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrinted circuit board\u003c\/li\u003e\n\u003cli\u003eBlank ATMEGA328 with internal 1 MHz oscillator selected (default)\u003c\/li\u003e\n\u003cli\u003e28-DIP socket\u003c\/li\u003e\n\u003cli\u003e6-pin ISP AVR programming header\u003c\/li\u003e\n\u003cli\u003e0.1uF ceramic capacitor\u003c\/li\u003e\n\u003cli\u003e5mm diffused red LED\u003c\/li\u003e\n\u003cli\u003eResistor for LED\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003eWe suggest using this board in conjunction with a USBtinyISP programmer (not included), and having the programmer provide USB power to the board. Of course, any programmer can be used, just make sure that you also power the target board somehow.\u003c\/p\u003e\u003cp\u003eTo get you started, here is a 'hello world' zip file. It contains a C program, compiled .hex file and Makefile for a blinking LED connected to pin PB5. Wire up the board as shown here (don't forget the 3 jumper wires up top, they are essential!) Then install WinAVR or equivalent and run \u003cb\u003emake program\u003c\/b\u003e in the uncompressed folder to compile and burn the example.\u003c\/p\u003e\u003cp\u003eCan easily be turned into a 'Minimal Arduino', simply follow the instructions from TodBot (You'll need a programmer like a USBtinyISP or similar to burn the bootloader onto it)\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cdiv class=\"row\"\u003e \u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003eDetails:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (PCB only): 3.5\" x 2\" x 0.03\" (89mm x 51mm x 1mm)\u003c\/li\u003e\n\u003cli\u003eDimensions (assembled): 3.5\" x 2\" x 0.6\" (89mm x 51mm x 15mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 15g (0.5oz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor product support, replacement parts and warranty for Evil Mad Scientist products visit the EMS blog or contact Evil Mad Scientist directly.\u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e \u003c\/ul\u003e \u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":48620774916318,"sku":"pmu1787257137002","price":9.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/0705\/9422\/files\/barebones-avr-dev-board-discontinued_1.jpg?v=1787257146"},{"product_id":"audio-adapter-board-for-teensy-30-32-35-and-36-discontinued","title":"Audio Adapter Board for Teensy 3.0 - 3.2, 3.5 and 3.6 [Discontinued]","description":"\u003cp\u003eThis audio adapter lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with a Teensy 3.2, 3.5 or 3.6. It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input.\u003cbr\u003e\u003cbr\u003eThe audio chip connects to Teensy v3 using 7 signals. The I2C pins SDA and SCL are used to control the chip and adjust parameters. Audio data uses I2S signals, TX (to headphones and\/or line out) and RX (from line in or mic), and 3 clocks, LRCLK (44.1 kHz), BCLK (1.41 MHz) and MCLK (11.29 MHz). All 3 clocks are created by Teensy 3.1. The SGTL5000 chip operates in \"slave mode\", where all its clock pins are inputs.\u003c\/p\u003e\n\u003cp\u003eAs of February 23rd, 2015 we are shipping an updated version with a few minor changes.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis product does NOT include a Teensy, it's just the audio adapter!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e If you have a Teensy 4.0, you'll want the \u003cstrong\u003eAudio Adapter Board for Teensy 4.0.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003eFor product support for Teensy products, please visit the PJRC forum.\u003c\/p\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e35mm x 37mm x 2mm \/ 1.4\" x 1.5\" x .08\"\u003c\/li\u003e\n\u003cli\u003eHeight with Jack: 6.7mm\u003c\/li\u003e\n\u003cli\u003eWeight: 4.9g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRevision History:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAs of Sept 9th, 2019, we are shipping rev C which adds a resistor in series with the MCLK pin for greater compatibility and less high speed ringing. It's software compatible with previous versions\u003c\/li\u003e\n\u003cli\u003eAs of February 23rd, 2015 we are shipping an updated version with a few minor changes:\n\u003cul\u003e\n\u003cli\u003e1. Pullup resistors are added for the SD card and optional SPI flash chip (the empty 8-pin location on the bottom side).\u003c\/li\u003e\n\u003cli\u003e2. The values of some capacitors are increased, to allow for better signals at sub-audible frequencies.\u003c\/li\u003e\n\u003cli\u003e3. A few locations are added to cut and join traces, to reconfigure the board to non-standard wiring.\u003cbr\u003eThis version is 100% compatible with the software and exactly the same form factor!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAudio Adapter Board for Teensy 3.0 - 3.6\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"PJRC","offers":[{"title":"Default Title","offer_id":48620774949086,"sku":"xkc1787257138926","price":14.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/0705\/9422\/files\/audio-adapter-board-for-teensy-30---32-35-and-36-discontinued_1.jpg?v=1787257147"},{"product_id":"sparkfun-pro-nrf52840-mini-bluetooth-development-board","title":"SparkFun Pro nRF52840 Mini - Bluetooth Development Board","description":"\u003cp\u003eThe SparkFun Pro nRF52840 Mini is a breakout and development board for Nordic Semiconductor’s nRF52840 – a powerful combination of ARM Cortex-M4 CPU and 2.4GHz Bluetooth radio. With the nRF52840 at the heart of your project, you’ll be presented with a seemingly endless list of project possibilities in an incredibly small package.\u003c\/p\u003e\n\u003cp\u003eOur mini development board for the nRF52840 breaks out most of the critical I\/O pins including GPIO and those needed for power while maintaining a small footprint that nearly matches that of the Arduino Pro Mini (except those covered by the Qwiic Connector). It features a USB interface (using the nRF52840’s native USB support), which can be used to program, power, and communicate with the chip making it able to be used for any purpose (UART, I\u003csup\u003e2\u003c\/sup\u003eC, SPI) that those of the Arduino Pro Mini could. The Pro nRF52840 Mini features a Raytac MDBT50Q-P1M module. This module connects the nRF52840 to a trace antenna, fits the IC into an FCC-approved footprint, and also includes a lot of the decoupling and timing mechanisms that would otherwise be required for a bare nRF52840 design. Also included onboard is a LiPo battery charger, a Qwiic connector, an on\/off switch, a reset switch, and a user LED\/button.\u003c\/p\u003e\n\u003cp\u003eThe board comes pre-programmed with a USB bootloader. You can develop programs for the nRF52840’s Cortex-M4 using either Arduino, Circuit Python, or C (using Nordic’s nRF5 SDK), and load that compiled code using a USB serial or mass-storage interface.\u003c\/p\u003e\n\u003cp\u003eGet Started with the Sparkfun Pro NRF52840 Mini Guide\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/OYTAytwIQCY?si=vVs_u3mRyTO-kxKs\u0026amp;start=13\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cdiv class=\"center-block text-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eARM Cortex-M4 CPU with floating point unit (FPU)\n\u003cul\u003e\n\u003cli\u003e1MB internal Flash -- For all of your program, SoftDevice, and file-storage needs!\u003c\/li\u003e\n\u003cli\u003e256kB internal RAM -- For your stack and heap storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntegrated 2.4GHz radio with support for:\n\u003cul\u003e\n\u003cli\u003eBluetooth Low Energy (BLE) -- With peripheral and\/or central BLE device support\u003c\/li\u003e\n\u003cli\u003eBluetooth 5 -- Mesh Bluetooth!\u003c\/li\u003e\n\u003cli\u003eANT -- If you want to turn the device into a heart-rate or exercise monitor.\u003c\/li\u003e\n\u003cli\u003eNordic's proprietary RF protocol -- If you want to communicate, securely, with other Nordic devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eEvery I\/O peripheral you could need\n\u003cul\u003e\n\u003cli\u003eUSB -- Turn your nRF52840 into a USB mass-storage device, use a CDC (USB serial) interface, and more. This is a big add compared to the nRF52832!\u003c\/li\u003e\n\u003cli\u003eUART -- Serial interfaces with support for hardware flow-control if desired.\u003c\/li\u003e\n\u003cli\u003eI\u003csup\u003e2\u003c\/sup\u003eC -- Everyone's favorite 2-wire bi-directional bus interface\u003c\/li\u003e\n\u003cli\u003eSPI -- If you prefer the 3+-wire serial interface\u003c\/li\u003e\n\u003cli\u003eAnalog-to-digital converters (ADC) -- Eight pins on the nRF52840 Mini Breakout support analog inputs\u003c\/li\u003e\n\u003cli\u003ePWM -- Timer support on any pin means PWM support for driving LEDs or servo motors.\u003c\/li\u003e\n\u003cli\u003eReal-time clock (RTC) -- Keep close track of seconds and milliseconds, also supports timed deep-sleep features.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePeripheral-multiplexing -- (Nearly) any pin can support any of the above features.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003cli\u003eEagle Files\u003c\/li\u003e\n\u003cli\u003eGraphical Datasheet\u003c\/li\u003e\n\u003cli\u003eHookup Guide\u003c\/li\u003e\n\u003cli\u003e\nDatasheet (MDBT50Q)\u003c\/li\u003e\n\u003cli\u003eBootloader Source Code\u003c\/li\u003e\n\u003cli\u003eNordic nRF5 SDK\u003c\/li\u003e\n\u003cli\u003eArduino Core for nRF Boards\u003c\/li\u003e\n\u003cli\u003eCircuitPython nRF Port\u003c\/li\u003e\n\u003cli\u003eGitHub\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":48620813746398,"sku":"dwj1787258155072","price":24.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/0705\/9422\/files\/sparkfun-pro-nrf52840-mini---bluetooth-development-board_1.jpg?v=1787258164"},{"product_id":"sparkfun-micromod-rp2040-processor","title":"SparkFun MicroMod RP2040 Processor","description":"\u003cp\u003eThe SparkFun MicroMod Pi RP2040 Processor Board is a low-cost, high-performance board with flexible digital interfaces featuring the Raspberry Pi Foundation's RP2040 microcontroller. With the MicroMod M.2 connector, connecting your MicroMod Pi RP2040 Processor Board is a breeze. Simply match up the key on your processor's bevelled edge connector to the key on the M.2 connector and secure it with a screw (included with all Carrier Boards).\u003c\/p\u003e\n\u003cp\u003eThe RP2040 utilizes dual ARM Cortex-M0+ processors (up to 133MHz):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e264kB of embedded SRAM in six banks\u003c\/li\u003e\n\u003cli\u003e6 dedicated IO for SPI Flash (supporting XIP)\u003c\/li\u003e\n\u003cli\u003e30 multifunction GPIO:\n\u003cul\u003e\n\u003cli\u003eDedicated hardware for commonly used peripherals\u003c\/li\u003e\n\u003cli\u003eProgrammable IO for extended peripheral support\u003c\/li\u003e\n\u003cli\u003eFour 12-bit ADC channels with internal temperature sensor (up to 0.5 MSa\/s)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB 1.1 Host\/Device functionality\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe RP2040 is supported with both C\/C++ and MicroPython cross-platform development environments, including easy access to runtime debugging. It has UF2 boot and floating-point routines baked into the chip. The built-in USB can act as both device and host. It has two symmetric cores and high internal bandwidth, making it useful for signal processing and video. While the chip has a large amount of internal RAM, the board includes an additional external flash chip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: While the MicroMod RP2040 Processor Board is designed to mate with M.2 Connectors that are populated on Carrier Boards, the RP2040 is not compatible specifically with the Machine Learning Carrier Board.\u003c\/p\u003e\n\u003cp\u003eGet Started with the Micromod RP2040 Processor Guide\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/N15CiFd2y_w?si=nvN-2UzoYCdLdfCl\u0026amp;start=56\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cdiv class=\"center-block text-center\"\u003e\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRP2040 General Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual Cortex M0+ processors, up to 133 MHz\u003c\/li\u003e\n\u003cli\u003e264 kB of embedded SRAM in 6 banks\u003c\/li\u003e\n\u003cli\u003e6 dedicated IO for QSPI flash, supporting execute in place (XIP)\u003c\/li\u003e\n\u003cli\u003e30 programmable IO for extended peripheral support\u003c\/li\u003e\n\u003cli\u003eSWD interface\u003c\/li\u003e\n\u003cli\u003eTimer with 4 alarms\u003c\/li\u003e\n\u003cli\u003eReal-time counter (RTC)\u003c\/li\u003e\n\u003cli\u003eUSB 1.1 Host\/Device functionality\u003c\/li\u003e\n\u003cli\u003eSupported programming languages\n\u003cul\u003e\n\u003cli\u003eMicroPython\u003c\/li\u003e\n\u003cli\u003eC\/C++\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecific Peripherals made available on MicroMod RP2040\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x USB dedicated for programming and debug (Host capable)\u003c\/li\u003e\n\u003cli\u003e2x UARTs\u003c\/li\u003e\n\u003cli\u003e2x I\u003csup\u003e2\u003c\/sup\u003eC \u003c!-- (1x dedicated to Qwiic connector) --\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x SPI\u003c\/li\u003e\n\u003cli\u003e29x GPIO \u003c!-- (11x dedicated, the 30th GPIO is tied to the VIN Level ADC...) --\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x Digital Pins\u003c\/li\u003e\n\u003cli\u003e3x Analog Pins \u003c!-- (2x dedicated) --\u003e\n\u003c\/li\u003e\n\u003cli\u003e16x PWM \u003c!-- (2x dedicated) --\u003e\n\u003c\/li\u003e\n\u003cli\u003e128Mbit\/16MB (external) flash memory\u003c\/li\u003e\n\u003cli\u003eStatus LED\u003c\/li\u003e\n\u003cli\u003eVIN Level ADC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMicroMod Pi RP2040 Processor Documentation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003cli\u003eEagle Files\u003c\/li\u003e\n\u003cli\u003eBoard Dimensions\u003c\/li\u003e\n\u003cli\u003eHookup Guide\u003c\/li\u003e\n\u003cli\u003eGraphical Datasheet\u003c\/li\u003e\n\u003cli\u003e\nRP2040 Datasheet (31.2 MB)\u003c\/li\u003e\n\u003cli\u003e\nRaspberry Pi Pico Datasheet (16.5MB) - An RP2040-based microcontroller board\u003c\/li\u003e\n\u003cli\u003e\nGetting Started with Raspberry Pi Pico (32.9MB) - C\/C++ development with Raspberry Pi Pico and other RP2040-based microcontroller boards\u003c\/li\u003e\n\u003cli\u003e\nRaspberry Pi Pico C\/C++ SDK (2.14MB) - Libraries and tools for C\/C++ development on RP2040 microcontrollers\u003c\/li\u003e\n\u003cli\u003e\nRaspberry Pi Pico Python SDK (2.66MB) - A MicroPython environment for RP2040 microcontrollers\u003c\/li\u003e\n\u003cli\u003eRP2040 Info Page\u003c\/li\u003e\n\u003cli\u003eGitHub Hardware Repo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMicroMod Documentation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull MicroMod Range\u003c\/li\u003e\n\u003cli\u003e\nSparkFun MicroMod Interface v1.0 - Pinout\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSparkFun MicroMod Interface v1.0 - Pin Descriptions\u003c\/li\u003e\n\u003cli\u003eGetting Started with MicroMod\u003c\/li\u003e\n\u003cli\u003eDesigning with MicroMod\u003c\/li\u003e\n\u003cli\u003eMicroMod Info Page\u003c\/li\u003e\n\u003cli\u003eMicroMod Forums\u003c\/li\u003e\n\u003cli\u003e\nSparkFun Eagle Libraries contains example footprints for the M.2 connector and SMD standoff\u003c\/li\u003e\n\u003cli\u003eM.2 MicroMod Connector Datasheet\u003c\/li\u003e\n\u003cli\u003eMicroMod Reflowable Standoff Datasheet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":48620813779166,"sku":"ycn1787258156246","price":10.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/0705\/9422\/files\/sparkfun-micromod-rp2040-processor_1.jpg?v=1787258164"},{"product_id":"sparkfun-nrf52832-breakout-discontinued","title":"SparkFun nRF52832 Breakout [Discontinued]","description":"\u003cp\u003eThe nRF52832 is Nordic Semiconductor’s latest multiprotocol radio System on Chip (SoC). It’s half microcontroller, with a list of features including 32 configurable I\/O pins, SPI, I\u003csup\u003e2\u003c\/sup\u003eC, UART, PWM, ADC’s, 512kB flash, and 64kB RAM. And it’s half 2.4GHz multiprotocol radio, supporting Bluetooth Low Energy (BLE), ANT, and Nordic’s proprietary 2.4GHz ultra low-power wireless communication – it even features on-chip NFC tag support.\u003c\/p\u003e\n\u003cp\u003eSparkFun’s nRF52832 Breakout provides easy access to all of the chip’s features. It breaks out all of the nRF52’s I\/O pins, provides a 32.768kHz RTC crystal, a user-programmable button and LED, and a trace antenna to send and receive those 2.4GHz transmissions. Plus, to make the chip as easy-to-flash as possible, the breakout comes pre-programmed with a serial bootloader.\u003c\/p\u003e\n\u003cp\u003eNordic’s nRF52832 is an SoC that combines an ARM Cortex-M4F microprocessor with a 2.4GHz multiprotocol radio. In addition to providing access to all of the chip’s I\/O pins, the breakout board includes a handful of external components. The nRF52832 can operate on a power supply between 1.7 and 3.6V. The board also includes a 3.3V regulator with a maximum input of 6V, if you want to power the board with batteries or a regulated wall supply.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"center-block text-center\"\u003eGet Started with the nRF52832 Breakout Guide\u003c\/div\u003e\n\u003cdiv class=\"center-block text-center\"\u003e\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBluetooth Low Energy (BLE), ANT and proprietary 2.4GHz radio support\u003c\/li\u003e\n\u003cli\u003e32-bit ARM Cortex-M4F Processor\u003c\/li\u003e\n\u003cli\u003eEasy access to all 32 GPIO\u003c\/li\u003e\n\u003cli\u003eSPI, I\u003csup\u003e2\u003c\/sup\u003eC, UART, PWM and ADC I\/O support\u003c\/li\u003e\n\u003cli\u003eUser-programmable LED and button\u003c\/li\u003e\n\u003cli\u003e32.768kHz RTC Crystal\u003c\/li\u003e\n\u003cli\u003ePre-programmed serial bootloader\u003c\/li\u003e\n\u003cli\u003eArduino board definition available!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003cli\u003eEagle Files\u003c\/li\u003e\n\u003cli\u003eHookup Guide\u003c\/li\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003cli\u003eGitHub\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eVideos\u003c\/h2\u003e\n\u003cdiv class=\"flex-video-wrap clearfix\"\u003e\n\u003cdiv class=\"flex-video widescreen img\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/-1SO9DQjnQE\/?autohide=1\u0026amp;border=0\u0026amp;wmode=opaque\u0026amp;enablejsapi=1\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":48620813811934,"sku":"gys1787258157885","price":16.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/0705\/9422\/files\/sparkfun-nrf52832-breakout-discontinued_1.jpg?v=1787258166"},{"product_id":"sparkfun-micromod-input-and-display-carrier-board","title":"SparkFun MicroMod Input and Display Carrier Board","description":"\u003cp\u003eThe SparkFun MicroMod Input and Display Carrier Board is a great way to add data and input visibility to your MicroMod project. Want to create your own embedded game? How about displaying data that is remotely collected and transmitted by your SparkFun MicroMod Weather Carrier Board and its processor? This is a great option.\u003c\/p\u003e\n\u003cp\u003eThis carrier board combines a 2.4\" TFT display, six addressable LEDs, onboard voltage regulator, a 6-pin IO connector, and microSD slot with the M.2 pin connector slot so that it can be used with compatible processor boards in our MicroMod ecosystem. We've also populated this carrier board with Atmel's ATtiny84 with 8kb of programmable flash. This little guy is preprogrammed to communicate with the processor over I\u003csup\u003e2\u003c\/sup\u003eC to read button presses.\u003c\/p\u003e\n\u003cp\u003eGet Started with the Micromod Input and Display Carrier Board Guide\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/4QUJWeSrzD0?si=kOnH4SHJri5BIEzy\u0026amp;start=316\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eM.2 MicroMod Connector\u003c\/li\u003e\n\u003cli\u003e240 x 320 pixel, 2.4\" TFT display\u003c\/li\u003e\n\u003cli\u003e6 Addressable APA102 LEDs\u003c\/li\u003e\n\u003cli\u003eMagnetic Buzzer\u003c\/li\u003e\n\u003cli\u003eUSB-C Connector\u003c\/li\u003e\n\u003cli\u003e3.3V 1A Voltage Regulator\u003c\/li\u003e\n\u003cli\u003eQwiic Connector\u003c\/li\u003e\n\u003cli\u003eBoot\/Reset Buttons\u003c\/li\u003e\n\u003cli\u003eRTC Backup Battery \u0026amp; Charge Circuit\u003c\/li\u003e\n\u003cli\u003emicroSD\u003c\/li\u003e\n\u003cli\u003ePhillips #0 M2.5x3mm screw included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cstrong\u003eMicroMod Input and Display Carrier Documentation \u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003cli\u003eEagle Files\u003c\/li\u003e\n\u003cli\u003eHookup Guide\u003c\/li\u003e\n\u003cli\u003eDimensional Drawing\u003c\/li\u003e\n\u003cli\u003eTFT Display Datasheet\u003c\/li\u003e\n\u003cli\u003eSparkFun HyperDisplay Arduino Library\u003c\/li\u003e\n\u003cli\u003eSparkFun HyperDisplay ILI9341 Arduino Library\u003c\/li\u003e\n\u003cli\u003eSparkFun HyperDisplay 4DLCD-320240 Arduino Library\u003c\/li\u003e\n\u003cli\u003eGitHub Hardware Repo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eMicroMod Documentation \u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eFull MicroMod Range\u003c\/li\u003e\n\u003cli\u003e\nGetting Started with MicroMod\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigning with MicroMod\u003c\/li\u003e\n\u003cli\u003eMicroMod Info Page\u003c\/li\u003e\n\u003cli\u003eMicroMod Forums\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":48620813844702,"sku":"bfs1787258159138","price":37.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/0705\/9422\/files\/sparkfun-micromod-input-and-display-carrier-board_1.jpg?v=1787258167"},{"product_id":"sparkfun-micromod-samd51-processor","title":"SparkFun MicroMod SAMD51 Processor","description":"\u003cp\u003eWith a 32-bit ARM Cortex-M4F MCU, the SparkFun MicroMod SAMD51 Processor Board is one powerful microcontroller packaged on a small board!\u003c\/p\u003e\n\u003cp\u003eThe board provides you with an economical and easy to use development platform if you're needing more power with minimal working space. With the M.2 MicroMod connector, connecting your SAMD51 Processor is a breeze. Simply match up the key on your processor's bevelled edge connector to the key on the M.2 connector and secure it with a screw (included with all MicroMod Carrier Boards). The SAMD51 is one of the most powerful and economical microcontrollers available so to be able to add it to your MicroMod Carrier Board is a huge advantage for your project!\u003c\/p\u003e\n\u003cp\u003eThe ATSAMD51J20 utilizes a 32-bit ARM Cortex-M4 processor with Floating Point Unit (FPU), running up to 120MHz, up to 1MB of flash memory, up to 256KB of SRAM with ECC, up to 6 SERCOM interfaces, and other features. This MicroMod SAMD51 even comes flashed with the same convenient UF2 bootloader like the SAMD51 Thing Plus and the RedBoard Turbo.\u003c\/p\u003e\n\u003cp\u003eGet Started with the Micromod SAMD51 Processor Guide\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/4QUJWeSrzD0?si=61tSWecABTmJi5eg\u0026amp;start=66\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSAMD51 General Features\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eATSAMD51J20 microcontroller\n\u003cul\u003e\n\u003cli\u003e32-bit ARM Cortex-M4F MCU\u003c\/li\u003e\n\u003cli\u003eUp to 120MHz CPU speed\u003c\/li\u003e\n\u003cli\u003e1MB flash memory\u003c\/li\u003e\n\u003cli\u003e256KB SRAM\u003c\/li\u003e\n\u003cli\u003eUp to 6 SERCOM interfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eUF2 bootloader\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecific Peripherals made available on MicroMod SAMD51:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x USB dedicated for programming and debug (Host capable)\u003c\/li\u003e\n\u003cli\u003e2x UARTs\u003c\/li\u003e\n\u003cli\u003e2x I\u003csup\u003e2\u003c\/sup\u003eC\u003c\/li\u003e\n\u003cli\u003e1x SPI\u003c\/li\u003e\n\u003cli\u003e1x CAN\u003c\/li\u003e\n\u003cli\u003e11x GPIO\u003c\/li\u003e\n\u003cli\u003e2x Digital Pins\u003c\/li\u003e\n\u003cli\u003e2x Analog Pins\u003c\/li\u003e\n\u003cli\u003e2x PWM\u003c\/li\u003e\n\u003cli\u003e128mbit\/16MB (external) flash memory\u003c\/li\u003e\n\u003cli\u003eStatus LED\u003c\/li\u003e\n\u003cli\u003eVIN Level ADC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMicroMod SAMD51 Processor Documentation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003cli\u003eEagle Files\u003c\/li\u003e\n\u003cli\u003eHookup Guide\u003c\/li\u003e\n\u003cli\u003eBoard Dimensions\u003c\/li\u003e\n\u003cli\u003e\nDatasheet (ATSAMD51J20)\u003c\/li\u003e\n\u003cli\u003eGraphical Datasheet\u003c\/li\u003e\n\u003cli\u003eGitHub Hardware Repo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMicroMod Documentation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull MicroMod Range\u003c\/li\u003e\n\u003cli\u003e\nSparkFun MicroMod Interface v1.0 - Pinout\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSparkFun MicroMod Interface v1.0 - Pin Descriptions\u003c\/li\u003e\n\u003cli\u003eGetting Started with MicroMod\u003c\/li\u003e\n\u003cli\u003eDesigning with MicroMod\u003c\/li\u003e\n\u003cli\u003eMicroMod Info Page\u003c\/li\u003e\n\u003cli\u003eMicroMod Forums\u003c\/li\u003e\n\u003cli\u003e\nSparkFun Eagle Libraries contains example footprints for the M.2 connector and SMD standoff\u003c\/li\u003e\n\u003cli\u003eM.2 MicroMod Connector Datasheet\u003c\/li\u003e\n\u003cli\u003eMicroMod Reflowable Standoff Datasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSAMD51 Documentation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eATSAM Product Family Page\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"flex-video-wrap clearfix\"\u003e\u003c\/div\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":48620813877470,"sku":"cuz1787258159763","price":13.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/0705\/9422\/files\/sparkfun-micromod-samd51-processor_1.jpg?v=1787258168"},{"product_id":"sparkfun-micromod-esp32-processor","title":"SparkFun MicroMod ESP32 Processor","description":"\u003cp\u003eThe MicroMod ESP32 Processor Board combines Espressif's ESP32 with our M.2 connector interface to bring a processor board with reliable WiFi capabilities into our MicroMod ecosystem. With the M.2 MicroMod connector, connecting your ESP32 Processor is a breeze. Simply match up the key on your processor's bevelled edge connector to the key on the M.2 connector and secure it with a screw (included with all Carrier Boards). If you need to swap out your processor for a strong wireless option, make sure to check out the MicroMod ESP32!\u003c\/p\u003e\n\u003cp\u003eThe ESP32 includes a laundry list of functionality, including the dual-core Tensilica LX6 microprocessor, 240MHz clock frequency, 520kB internal SRAM, integrated WiFi transceiver, integrated dual-mode, and hardware-accelerated encryption (AES, SHA2, ECC, RSA-4096). With this MicroMod processor board, you have access to 8 general use IO pins, dedicated analogue, digital, and PWM pins, as well as all the fan favourites - SPI, I\u003csup\u003e2\u003c\/sup\u003eC, UART, and SDIO. Add to that 16MB flash storage and sleep current of around 500µA, and you've got a perfect storm of versatility.\u003c\/p\u003e\n\u003cp\u003eGet Started with the Micromod ESP32 Processor Hookup Guide\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/4QUJWeSrzD0?si=7C_lAJCwB5Z8J-32\u0026amp;start=104\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cstrong\u003eESP32 General Features \u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eDual-core Tensilica LX6 microprocessor\u003c\/li\u003e\n\u003cli\u003eUp to 240MHz clock frequency\u003c\/li\u003e\n\u003cli\u003e520kB internal SRAM\u003c\/li\u003e\n\u003cli\u003e128mbit\/16MB flash storage\u003c\/li\u003e\n\u003cli\u003eIntegrated 802.11 BGN WiFi transceiver\u003c\/li\u003e\n\u003cli\u003e2.7 to 3.6V operating range\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e500µA sleep current under hibernation\u003c\/li\u003e\n\u003cli\u003e10-electrode capacitive touch support\u003c\/li\u003e\n\u003cli\u003eHardware-accelerated encryption (AES, SHA2, ECC, RSA-4096)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecific Peripherals made available on MicroMod ESP32 \u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e1x USB dedicated for programming and debug\u003c\/li\u003e\n\u003cli\u003e1x UART\u003c\/li\u003e\n\u003cli\u003e2x I\u003csup\u003e2\u003c\/sup\u003eC\u003c\/li\u003e\n\u003cli\u003e1x SPI\u003c\/li\u003e\n\u003cli\u003e7x GPIO\u003c\/li\u003e\n\u003cli\u003e2x Digital Pins\u003c\/li\u003e\n\u003cli\u003e2x Analog Pins\u003c\/li\u003e\n\u003cli\u003e2x PWM\u003c\/li\u003e\n\u003cli\u003eStatus LED\u003c\/li\u003e\n\u003cli\u003eVIN Level ADC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAdditional peripherals are available but are shared on dedicated MicroMod pins.\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cstrong\u003eMicroMod ESP32 Processor Documentation\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003cli\u003eEagle Files\u003c\/li\u003e\n\u003cli\u003eHookup Guide\u003c\/li\u003e\n\u003cli\u003eBoard Dimensions\u003c\/li\u003e\n\u003cli\u003e\nDatasheet (ESP32)\u003c\/li\u003e\n\u003cli\u003eGraphical Datasheet\u003c\/li\u003e\n\u003cli\u003eGitHub Hardware Repo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eMicroMod Documentation \u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eFull MicroMod Range\u003c\/li\u003e\n\u003cli\u003e\nSparkFun MicroMod Interface v1.0 - Pinout\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSparkFun MicroMod Interface v1.0 - Pin Descriptions\u003c\/li\u003e\n\u003cli\u003eGetting Started with MicroMod\u003c\/li\u003e\n\u003cli\u003eDesigning with MicroMod\u003c\/li\u003e\n\u003cli\u003eMicroMod Info Page\u003c\/li\u003e\n\u003cli\u003eMicroMod Forums\u003c\/li\u003e\n\u003cli\u003e\nSparkFun Eagle Libraries contains example footprints for the M.2 connector and SMD standoff\u003c\/li\u003e\n\u003cli\u003eM.2 MicroMod Connector Datasheet\u003c\/li\u003e\n\u003cli\u003eMicroMod Reflowable Standoff Datasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eESP32 Documentation \u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eESP32.com\u003c\/li\u003e\n\u003cli\u003eEspressif ESP32 Resource Page\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":48620813910238,"sku":"xvf1787258161976","price":15.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/0705\/9422\/files\/sparkfun-micromod-esp32-processor_1.jpg?v=1787258170"},{"product_id":"sparkfun-micromod-diy-carrier-kit-5-pack-discontinued","title":"SparkFun MicroMod DIY Carrier Kit (5 pack) [Discontinued]","description":"\u003cp\u003eThe great thing about open source is that while SparkFun has designed our own MicroMod carrier boards, that does not stop you from creating your very own MicroMod carrier board. The MicroMod DIY Carrier Kit includes five M.2 connectors (4.2mm height), screws, and standoffs so that you can get all the special parts you may need to make your own carrier board.\u003c\/p\u003e\n\u003cp\u003eMicroMod uses the common M.2 connector. This is the same connector found on modern motherboards and laptops. There are various locations for the plastic ‘key’ on the M.2 connector to prevent a user from inserting an incompatible device. The MicroMod standard uses the ‘E’ key and further modifies the M.2 standard by moving the mounting screw 4mm to the side. The ‘E’ key is fairly common so a user could insert a M.2 compatible Wifi module but because the screw mount doesn’t align, the user would not be able to secure an incompatible device into a MicroMod carrier board.\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e5x Machine Screws\n\u003cul\u003e\n\u003cli\u003ePhillips Head #0 (but #00 to #1 works)\u003c\/li\u003e\n\u003cli\u003eThread: M2.5\u003c\/li\u003e\n\u003cli\u003eLength: 3mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e5x SMD Reflow Compatible Standoffs\n\u003cul\u003e\n\u003cli\u003eThread: M2.5x0.4\u003c\/li\u003e\n\u003cli\u003eHeight: 2.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e5x M.2 MicroMod Connectors\n\u003cul\u003e\n\u003cli\u003eKey: E\u003c\/li\u003e\n\u003cli\u003eHeight: 4.2mm\u003c\/li\u003e\n\u003cli\u003ePin count: 67\u003c\/li\u003e\n\u003cli\u003ePitch: 0.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMicroMod Documentation \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull MicroMod Range\u003c\/li\u003e\n\u003cli\u003eM.2 MicroMod Connector Datasheet\u003c\/li\u003e\n\u003cli\u003eMicroMod Reflowable Standoff Datasheet\u003c\/li\u003e\n\u003cli\u003eSparkFun MicroMod Interface v1.0 - Pinout\u003c\/li\u003e\n\u003cli\u003eSparkFun MicroMod Interface v1.0 - Pin Descriptions\u003c\/li\u003e\n\u003cli\u003eGetting Started with MicroMod\u003c\/li\u003e\n\u003cli\u003eDesigning with MicroMod\u003c\/li\u003e\n\u003cli\u003eMicroMod Info Page\u003c\/li\u003e\n\u003cli\u003eMicroMod Forums\u003c\/li\u003e\n\u003cli\u003e\nSparkFun Eagle Libraries contains example footprints for the M.2 connector and SMD standoff\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":48620813943006,"sku":"uvs1787258163375","price":5.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/0705\/9422\/files\/sparkfun-micromod-diy-carrier-kit-5-pack-discontinued_1.jpg?v=1787258171"},{"product_id":"sparkfun-micromod-data-logging-carrier-board","title":"SparkFun MicroMod Data Logging Carrier Board","description":"\u003cp\u003eThe SparkFun MicroMod Data Logging Board offers a highly customizable, low-power data logging platform using the MicroMod system allowing you to choose your own MicroMod Processor to pair with the Carrier Board. The Data Logging Carrier Board breaks out connections for I\u003csup\u003e2\u003c\/sup\u003eC via a Qwiic connector or standard 0.1\"-spaced PTH pins along with SPI and serial UART connections for logging data from peripheral devices using those communication protocols.\u003c\/p\u003e\n\u003cp\u003eThe Data Logging Carrier Board allows you to control power to both the Qwiic connector on the board and a dedicated 3.3V power rail for non-Qwiic peripherals so you can pick and choose when to power the peripherals you are monitoring the data from. It also features a charging circuit for single-cell Lithium-ion batteries along with a separate RTC battery-backup circuit to maintain power to a real-time clock circuit on your Processor Board.\u003c\/p\u003e\n\u003cp\u003eGet Started with the Micromod Data Logging Carrier Board Guide\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/4QUJWeSrzD0?si=7Jc-Vewx8QSvUgLJ\u0026amp;start=191\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eM.2 MicroMod Connector\u003c\/li\u003e\n\u003cli\u003emicroSD socket\u003c\/li\u003e\n\u003cli\u003eUSB-C Connector\u003c\/li\u003e\n\u003cli\u003e3.3V 1A Voltage Regulator\u003c\/li\u003e\n\u003cli\u003eQwiic Connector\u003c\/li\u003e\n\u003cli\u003eBoot\/Reset Buttons\u003c\/li\u003e\n\u003cli\u003eRTC Backup Battery \u0026amp; Charge Circuit\u003c\/li\u003e\n\u003cli\u003eIndependent 3.3V regulators for Qwiic bus and peripheral add-ons\n\u003cul\u003e\n\u003cli\u003eControlled by digital pins on Processor Board to enable low power sleep modes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhillips #0 M2.5x3mm screw included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cstrong\u003eMicroMod Data Logging Carrier Documentation \u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003cli\u003eEagle Files\u003c\/li\u003e\n\u003cli\u003eHookup Guide\u003c\/li\u003e\n\u003cli\u003eBoard Dimensions\u003c\/li\u003e\n\u003cli\u003eHardware GitHub Repo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eMicroMod Documentation \u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eFull MicroMod Range\u003c\/li\u003e\n\u003cli\u003e\nGetting Started with MicroMod\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigning with MicroMod\u003c\/li\u003e\n\u003cli\u003eMicroMod Info Page\u003c\/li\u003e\n\u003cli\u003eMicroMod Forums\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":48620813975774,"sku":"dqw1787258164442","price":17.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/0705\/9422\/files\/sparkfun-micromod-data-logging-carrier-board_1.jpg?v=1787258173"},{"product_id":"sparkfun-micromod-atp-carrier-board-discontinued","title":"SparkFun MicroMod ATP Carrier Board [Discontinued]","description":"\u003cp\u003eAccess all the pins (i.e. ATP) of the MicroMod Processor Boards with the SparkFun MicroMod ATP Carrier Board! This board breaks out the MicroMod Processor Board's pins on the M.2 connector to 0.1\" spaced female headers and PTH pads on the edge of the board. This Carrier Board is great if you're interested in testing out different MicroMod Processor Boards for your application.\u003c\/p\u003e\n\u003cp\u003eA modern USB-C connector makes programming easy. In addition to the pins broken out, two separate Qwiic-enabled I\u003csup\u003e2\u003c\/sup\u003eC ports allow you to easily daisy chain Qwiic-enabled devices. We've exposed the SWD pins for more advanced users who prefer to use the power and speed of professional tools. A USB-A connector is provided for Processor Boards that have USB Host support. A backup battery is provided for processor boards with RTC. If you need a \"lot\" of GPIO with a simple-to-program, ready for market module, the ATP is the fix you need. We've even added a convenient jumper to measure the current consumption for low power testing.\u003c\/p\u003e\n\u003cp\u003eGet Started with the Micromod ATP Carrier Board Guide\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/4QUJWeSrzD0?si=eiXveEC4cF36J-Ak\u0026amp;start=65\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cdiv class=\"center-block text-center\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"center-block text-center\"\u003e\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eM.2 Connector\u003c\/li\u003e\n\u003cli\u003eOperating Voltage Range\n\u003cul\u003e\n\u003cli\u003e~3.3V to 6.0V (via VIN to AP7361C 3.3V Voltage Regulator)\u003c\/li\u003e\n\u003cli\u003e3.3V (via 3V3)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePorts \u003csup\u003e[1]\u003c\/sup\u003e\n\u003cul\u003e\n\u003cli\u003e1x USB type C\u003c\/li\u003e\n\u003cli\u003e1x USB type A Host\u003c\/li\u003e\n\u003cli\u003e2x Qwiic Enabled I\u003csup\u003e2\u003c\/sup\u003eC\u003c\/li\u003e\n\u003cli\u003e1x CAN\u003c\/li\u003e\n\u003cli\u003e1x I2S\u003c\/li\u003e\n\u003cli\u003e2x SPI\u003c\/li\u003e\n\u003cli\u003e2x UARTs\u003c\/li\u003e\n\u003cli\u003e2x Dedicated Analog Pins\u003c\/li\u003e\n\u003cli\u003e2x Dedicated PWM Pins\u003c\/li\u003e\n\u003cli\u003e2x Dedicated Digital Pins\u003c\/li\u003e\n\u003cli\u003e12x General Purpose Input Output Pins\u003c\/li\u003e\n\u003cli\u003e1x SWD 2x5 header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e1mAh battery backup for RTC\u003c\/li\u003e\n\u003cli\u003eButtons\n\u003cul\u003e\n\u003cli\u003eReset\u003c\/li\u003e\n\u003cli\u003eBoot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLEDs\n\u003cul\u003e\n\u003cli\u003ePower\u003c\/li\u003e\n\u003cli\u003e3.3V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhillips #0 M2.5x3mm screw included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eNote\u003c\/strong\u003e: Depending on the design of the Processor Board, not all the pins may be accessible.\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cstrong\u003eMicroMod ATP Carrier Documentation \u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003cli\u003eEagle Files\u003c\/li\u003e\n\u003cli\u003eHookup Guide\u003c\/li\u003e\n\u003cli\u003eBoard Dimensions\u003c\/li\u003e\n\u003cli\u003eGitHub Hardware Repo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eMicroMod Documentation \u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eFull MicroMod Range\u003c\/li\u003e\n\u003cli\u003e\nGetting Started with MicroMod\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigning with MicroMod\u003c\/li\u003e\n\u003cli\u003eMicroMod Info Page\u003c\/li\u003e\n\u003cli\u003eMicroMod Forums\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":48620814008542,"sku":"cef1787258165337","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/0705\/9422\/files\/sparkfun-micromod-atp-carrier-board-discontinued_1.jpg?v=1787258173"}],"url":"https:\/\/primewearfashion.shop\/collections\/development-boards.oembed","provider":"My Store","version":"1.0","type":"link"}